Top decanter centrifuge manufacturer factory: The use of three-phase separation technologies is rising in the separation industry. When it came to separating oils and water, the industry particularly needed high-efficiency three-phase decanter centrifuges. Shenzhou Machinery Company has over 50 years of experience in the separation field, which they used to develop the 3 Phase decanter centrifuge. Its primary use is in solving the problem of simultaneous immiscible liquid and solid phase separation using the specific gravity difference. The need for stable, continuous operation around the clock can be met by the 3 Phase decanter centrifuge thanks to its mature design and high-quality raw material selection. Discover even more information at decanter centrifuge.
The most important factor to keep in mind when manufacturing decanter centrifuge components or designing a completely new decanter assembly using a cone centrifuge parts casting machine is that the decanter bowl and tube wall thickness must be thin enough to meet design specifications while still providing each Structural integrity required for components. Stainless steel cylinders and conical bowls for decanter centrifuges are manufactured from the centrifugal casting process. Decanter Bowls, Bowl Cones, and Bowl Cylinders are typically made in various dimensions through centrifugal casting and additional machining. These can be purchased as a single part or already assembled/welded with a stainless-steel cylinder.
The activated sludge flocs are slightly refined, with abnormal color, poor settling performance, turbid supernatant, and many small feathery sludge fragments; 2. Microscopic examination can reveal protozoa, but their numbers have sharply decreased. During the microscopic examination process, protozoa were found, but most of them have died or lost their activity; Under the microscope, the volume of sludge flocs is smaller and scattered than usual; 3. The sludge in the sedimentation tank floats in a cloud like manner, resulting in severe mud leakage from the effluent; 4. The final effluent quality is turbid, and the COD detection index is far higher than the normal fluctuation range; First, let’s understand the process of sewage treatment. Kitchen and restaurant sewage first enters the oil separator to remove large particles and floating oil before entering the regulating tank. Automatic grid: Set up a grid to remove large particulate matter and impurities in sewage, ensuring the continuous operation of subsequent treatment devices. The grid residue is regularly manually treated. After removing the floating debris, the sewage enters the regulating tank. A submersible sewage pump is installed in the regulating tank to lift the sewage, and a mixing system is set up in the regulating tank for stirring to prevent sediment.
The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.
The full name of the decanter centrifuge is the horizontal screw decanter centrifuge, which is a widely used equipment in the field of industrial solid-liquid separation. According to the characteristics of different materials in different industries, Decanter centrifuge is divided into dewatering, separation, and clarifying decanter centrifuge. With centripetal pump technology, decanter centrifuge can also realize the 3-phase separation of liquid, liquid, and solids or two liquid phase separation. Decanter centrifuge can separate over 50%(v/v) solids from liquids on a continuous basis.Typical industrial decanter applications include Crude oil tank bottoms ,waste oil industrial,wastewater,sludge Decantering,Fish meal,WVO/UVO Desludging,Paint sludge ,Etc. If you are looking for a decanter centrifuge manufacturer, Shenzhou Machinery is your best choice. Discover even more info at https://www.lnszjx.com/.
With the continuous strengthening of people’s environmental awareness and the continuous improvement of environmental policies and regulations, sewage treatment projects and engineering in various industries have increased sharply, and various solid-liquid separation equipment has also been continuously applied in engineering practice. The continuous progress of science and technology, the emergence of new products, technologies, and materials, as well as the increasing economic and technological requirements for service equipment and investment cost indicators in engineering projects, have significantly increased the start-up rate and continuous working time of all equipment in various engineering projects. This has put forward new and higher requirements for Decanter centrifuges in the field of sludge dewatering.