Led street light provider in China: Do Your Homework on Energy Savings: If you’re going to buy LED landscape lighting, then doing your homework on how much money you could save on energy is a must. While it’s true that all of the bulbs are more environmentally friendly, not all of them will save you as much money on your electric bill as others. One way to make sure that you end up saving money long term is to calculate how much electricity each fixture uses per hour and then compare this number with the current energy costs in your area. Some LED lighting options can actually use more electricity than incandescent and fluorescent lights! Read additional information on cylinder downlight.
Confirm what design pattern for the whole system you prefer. There are about 4 design shapes for the whole lighting system- L shape, I Shape, parallel lines Shape, and Square shape. Square shape. It is suitable for living rooms, and offices. U Shape: Mainly used for living room. L Shape: Good for use in corridors, living rooms, and cloakrooms. I Shape: For the living room, dining room, and kitchen room. Choosing a suitable magnetic track rail: Recessed magnetic track: It is suitable for new houses that have not yet suspended ceilings. It is necessary to make grooves and pre-embed tracks, and then press them with the ceiling. Trimless magnetic rail: It is used in the room where the ceiling has been made, and the hole is directly fixed on the ceiling plasterboard. Surface / Pendant magnet track: Mainly used for places that are without false ceilings or not good for making plasterboard such as supermarkets, offices, etc.
Input voltage: The input voltage of LED floodlights on the market mainly includes 110-120VAC for japan, USA, Canada markets, 220-240VAC for other countries, and low voltage AC/DC12V, 24V, 36V, 48V, 60V. Before purchasing floodlights fixtures , Please confirm which input voltage meets your needs. Color temperature refers to the color value emitted by the light source. Different light colors of lamps give people different feelings. There are three options for LED lamps on the market. 3000K warm white: looks like yellow, making people feel warm, comfortable. 4000K-4500K Natural white: looks like sunlight. 5500k-6500k cold white: Bluish white light.
Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.
How many watts is a solar street light? The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts. What are the disadvantages of solar street lights? High Initial Cost: Solar street lights require a significant upfront investment. The cost of a single solar street light can range from $2,000 to $5,000, depending on the size and type of the light. LED street lamps emit white light when the color temperature is around 5000K, and yellow or warm white light when the color temperature is around 3000K. In fact, yellow light or warm white light around 3000K is more suitable for road lighting, while the color temperature of LED street lights around 5000K is not suitable for road lighting. Because the color temperature of 5000K will make people feel very cold and dazzling, which will cause people’s vision to be overly fatigued, and under this color temperature condition, people’s ability to observe in the distance will also decrease, reducing the driving safety of drivers. In addition, in rainy and foggy weather, LED street lights with a color temperature of 5000K have poor penetration ability, which also affects the travel safety of pedestrians.
Instantaneous start-up. No need for a pre-warm-up start-up. Low Light decay. It is 1% decrease at 3000 hours. 3% decrease in 10000 hours. Environment-friendly. Led floodlights do not contain mercury, toxic gases, and liquids, and will not pollute the environment. At the same time, some lamps can be replaced and reused by outdoor LED flood light bulbs. As the latest generation of lighting fixtures, LED floodlights have the characteristics of environmental protection, energy saving and high luminous efficiency. More and more people choose it to replace traditional metal halide flood light or HPS flood light. So, what is a LED floodlight equivalent to metal halide/HPS flood lights? Stronger R&D: We are always keeping innovation in led lights according to markets trend. It is ok to research and development based on your ideas and advice.
GRNLED (Golumen) is the best magnetic track lighting manufacturer, factory, and supplier in china since 2018, with ISO9001:2015, providing high-quality magnet track light with Osram, Philips chips, and 2.4G TUYA WIFI, BLUETOOTH, ZIGBEE smart magnetic track lighting system with low voltage DC48V or 110V/220-240VAC input voltage at a competitive price. Our magnetic linear track lights have been CE RoHS approved. It is ok to do ETL, UL, CSA, SAA, and CB magnetic track lights if needed.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
What are the advantages of solar powered street lights? Cost Savings: Solar-powered street lights are much more cost effective than traditional street lights, as they require no electricity or wiring. Eco-Friendly: Solar-powered street lights are powered by renewable energy sources, making them an environmentally friendly option. Low Maintenance: Solar-powered street lights require minimal maintenance, as they do not require any wiring or electricity. Durability: Solar-powered street lights are designed to withstand harsh weather conditions, making them a durable and reliable option.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Read additional information on grnled.com.
GRNLED and GOLUMEN is the best led light manufacturer in china, with ISO9001:2015 approval. And our products mostly got CE-LVD, EMC, and RoHS certificates. It is ok for us to get CB, ETL, SAA, UL, cUL, SASAO, etc if requested. OEM/ ODM available, making design freely for led lights, or color boxes. Providing IES Files for DiaLux testing. No MOQ limits for retailers, wholesalers, distributors, or engineering companies. Customization is available.